|
cabling:
BiiTs
are currently
are working towards BS5750 ISO 9002 registered
company for the supply and installation of network
cabling and equipment. This ensures that the cabling
systems installed will be tested and will meet or
exceed the performance requirements of EN 50173.
Category 5 & 5e:
All
category 5 & 5e Cables and Components will be tested
using Fluke DSP certified and calibrated test
equipment. All test will be carried out according to
the governing regulation at the highest level.
Voice:
All voice
cables, components and Terminations will be tested
with the above equipment. The four wire Basic Link
test will be performed for Continuity and Correct
pin assignment.
Optic fibre:
All
Optic Fibre Cables, Terminations and Components will
be tested using Fluke OTDR certified and calibrated
test equipment. All tests will be carried out
according to the governing regulation at the highest
level.
We install the
systems, start the web design and begin hosting, and
register the Domain name for your company; i.e.
yourcompany.com.
The solution is implemented and our
full support, maintenance and development service is
ongoing from that point onward.
servers:
Our
use of
servers provide growing businesses with the
essential tools to make sharing information and
connecting with business partners and customers
easier. All of your organisation's needs must be
taken into careful consideration - sharing files and
printers, running your business critical
applications, email and scheduling, and support for
Internet and communications services-including web,
remote access and fax.
workstations:
The
server operating system and other systems required
by the business will influence the workstation
environment. The design, standards setting and
configuration of these environments requires careful
integration testing to ensure the stability,
reliability and optimisation of performance with due
regard to the impact on the network of this design
and "tuning". Particular network environments can
suffer in performance and incur cost penalties in
the absence of such integration.
switches & hubs:
Whilst
recognising that there are benefits from selecting
products from a small set or even a single
manufacturer, this must always be done with regard
to a holistic cost-effective model.
BiiTs has well
established agreements with all major networking and
infrastructure vendors including Cisco, Nortel
Networks, 3Com, Cabletron, BICC, Krone and Mod-Tap.
BiiTs will always seek to
minimise the variation of manufacturer equipment
installed across the client estate whilst providing
the optimum design for each task. BiiTs only hire
appropriately trained personnel to configure the
active system equipment from the selected
manufacturer.
lan/wan solutions:
With experience in the
fields of both Local and Wide Area Networking,
we are the perfect partner for any company
looking either to acquire new computing hardware, or
upgrade an older network. We are able to cater for
small, medium and enterprise sized networks, with
staff qualified to install all common network media
from simple wired office networks to high-speed
fibre optic links and wide area leased line
solutions. Additionally we have experience with the
educational sector, and can advise on the most
appropriate solution for either an administrative or
learning-based system. Services such as email,
internet access, faxing to and from the desktop etc
can be easily configured with as much flexibility
and/or control as desired. |
